Specifications

0
3
n Low cost regenerative drive: Designed for OEM applications.
n 4Q reversing: Regenerative/4 quadrant drives have the ability to perform quick, contactorless reversing on-the-fly!
n Speed range and regulation: 1% regulation over 60:1 speed range.
n User adjustable calibration pots: IR compensation, maximum speed, acceleration/deceleration, forward torque and
reverse torque.
n Stopping modes: User can decelerate (N.O.), regeneratively brake (N.O.) or coast the motor to a stop (N.C.).
n Spade terminals: Easy to use, lower cost, and able to fit in a smaller package.
n Options and accessories: 201-0024 inhibit plug with 18” leads for regenerative brake or coast option, 200-0386 limit
switch logic board and PCM4 signal isolator.
n Optional Burr Brown isolation: Isolation daughter card can be added by including a “-PCM” at the end of the part
number. See Adder Boards under drive accessories for details.
Minarik, the leader in regenerative drive technology expands its
product line with the addition of the RGT Series. These full-wave,
four quadrant SCR regenerative drives contain many of the features
of our popular RG Series, but are built with the high-volume cost-
conscious customer in mind. The “T” stands for “trimmed” because
we eliminated features that are not necessary for streamlined appli-
cations and high-volume.
RGT drives are compatible with brush-type DC motors from 1/20 to
2 Hp. If low-cost with basic features is what your application
requires, the RGT is your regen.
1/20 to 2 Hp
SCR DC Regen
Typical Applications
RGT Dimensions
RGT300U
All dimensions in inches [millimeters]
For drives with heat sink dimensions, contact Minarik or
download manuals from the web at www.minarikdrives.com.
For matching DC motors, see pages 37 to 48.
FEATURES & BENEFITS
n Conveyors
n Packaging Machines
n Indexing
n Web Tensioning
n Door Controls
RGT Series Specifications
Models
Input Voltage
(VAC)
Output Voltage
(VDC)
Output Current
(amps)
Form
Factor
Hp Rating
RGT310U
115
0 - 90
3
1/20 - 1/8
1/4 - 1
1/2 - 2
1.37
1.37
1.37
10*
10*
Peak Current
(amps)
5
15
15
0 - 90
0 - 180
115
230
RGT300U
RGT400U
*Use heatsink 223 - 0235 when armature current is above 7ADC. Drives operate from 50 - 60 Hz.
RGT Series
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
C
REGENERATIVE DRIVES