Specifications

FEATURES & BENEFITS
3
2
n NEMA 1 enclosure: Protects against accidental contact and falling objects.
n Speed range and regulation: 1% regulation over 80:1 speed range.
n User adjustable calibration pots: IR compensation, max speed, current limit and min speed.
n Stopping modes: Decelerate to zero speed with speed pot (with built-in switch) set to “off”.
n Diagnostic LEDs: LED for Power On light on front of enclosure.
n Spade terminals: Easy to use, lower cost, and able to fit in a smaller package.
n 22kHz switching frequency: A high switching frequency means a quieter motor!
n Accepts AC or DC input: Can accept an input of 100-160VDC or 90-130VAC
n Additional features: AC line fuse and mounted speed pot with built-in on/off switch.
Typical Applications
1/100 to 1/4 Hp
PWM DC NEMA 1
C1XP01-115AC-A
For applications requiring basic drive protection from falling
objects or incidental contact, Minarik offers the XP Series of low
cost, high performance pulse-width-modulation (PWM) DC motor
speed drives housed within a NEMA 1 enclosure. These filtered
drives have a power-on LED and a power switch/speed adjust
knob located on the front of the case. With a 115 VAC input, the
XPs control 130 VDC brush-type motors from 1/100 to 1/4 Hp.
Standard XP drives accept any voltage ranging from 90 to 130
VAC. XP drives contain an inexpensive unipolar power supply,
which enables them to accept any DC voltage input between 100
and 160 VDC. After proper calibration, users can also operate
low voltage motors without additional circuitry. All Minarik filtered
PWM drives yield a constant 1.05 form factor or less over the 80:1
speed range resulting in smooth, quiet, cool and low maintenance
motor operation.
n Medical Equipment
n Office Machinery
n Food Processing
n Packaging Equipment
n Blenders and Mixers
n Woodworking
Machinery
C1XP Series
C1XP Series Specifications
Drives operate from 50 - 60 Hz.
C1XP01-115AC-A
90-130V
100-160V
100-160V
0 - 130
1.0
1.05
1.05
1/100 - 1/10 @ 130 VDC
1/10 - 1/4 @ 130 VDC
3.0
0 - 130
90-130V
C1XP03-115AC-A
Models
Input Voltage
(AC)
Input Voltage
(DC)
Output Voltage
(VDC)
Max. Output
Current (ADC)
Form Factor
Hp Rating
C1XP Dimensions
1.82 [46]
3.51 [89]
0.88 [22]
3.20 [81]
5.50 [140]
3.42 [87]
2.28 [58]
2.50 [64]
1.06 [27]
All dimensions in inches [millimeters]
For matching DC motors, see pages 37 to 48.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES