Specifications

FEATURES & BENEFITS
0
2
1/50 to 2 Hp
Low Voltage PWM DC
n MM footprint: An extremely compact size in an industry standard mounting footprint.
n Speed range and regulation: 1% regulation over 80:1 speed range.
n User adjustable calibration pots: IR compensation, max speed, current limit and acceleration/deceleration.
n Stopping modes: Decelerate to zero speed by adding a N.O. switch to the pot circuit, or add a dynamic braking switch
and resistor.
n Low Voltage Motor Operation: Designed for 12-60VDC motors.
n 22kHz switching frequency: A high switching frequency means a quieter motor!
n DC input voltage: Accepts DC input and outputs DC voltage up to 95% of the input with near perfect form factor.
Special DC input and output voltages may be accommodated. Please contact the factory.
n Additional features: Switch mode power supply to maintain stable drive operation under low voltage battery condition.
Typical Applications
XP32-12/24DC
n Portable Equipment
n Electric Vehicles
n Farm Equipment
n Self-Powered Material
Handling Equipment
n Fork Lifts
XP DC Series Specifications
Models
Input Voltage
(VDC)
Output Voltage
(VDC)
Max. Output
Current (ADC)
Form Factor
Hp Rating
XP08-60DC
50-70
0-60
8
1
1/50-1
1/50-1
1/50-1
1/10-2
1.01
1.01
1.01
1.01
16
1
32
2
60
2
0-48
0-24
0-24
32-50
10-32
10-32
XP16-36/48DC
XP32-12/24DC
XP60-12/24DC
1
At 40°C ambient no additional heatsink is necessary.
2
XP32 and XP60 Series drives require heatsink kit 223-0159 or equivalent when continuous
current is above 20 amps. Output can go as high as 95% of DC supply voltage.
XP DC Dimensions
All dimensions in inches [millimeters]
3.64
[93]
1.75 [44]
0.74 [19]
0.19 [5]
1.37 [35]
1.35
[34]
1.03 [26]
3.80 [97]
4.30 [109]
XP DC Series
Minarik’s XP Series of DC drives provide high per-
formance at a low cost. Designed for applications
running from a DC power supply or battery power
input, the DC/DC XP Series controls brush-type
DC motors from 1/50 Hp through 2 Hp.
Remarkably efficient, standard DC/DC XP drives
operate low voltage motors from 12 VDC to 60
VDC, up to 60 amps. Users requiring specifica-
tions outside of this range should consult the fac-
tory.
Properly rated, a single drive can operate motors
from different voltage specifications. We also fea-
ture a switch mode power supply to keep the drive
logic at a level sufficient for stable operation when
the incoming battery voltage sags below rated
specifications. Pulse-width-modulation (PWM) cir-
cuitry in the DC/DC XP drives results in quick cir-
cuit response and a constant 1.01 form factor
through an 80:1 speed range.
DC/DC XP drives are ideal for applications using
remote control and where AC power is inaccessi-
ble. Also, DC/DC XP drives are an excellent alter-
native to multiple stand-alone drives in AC pow-
ered machinery.
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES