Specifications

FEATURES & BENEFITS
7
1
n Speed range and regulation: 1% regulation over 30:1 speed range.
n User adjustable calibration pots: IR compensation, min speed, max speed and current limit.
n Diagnostic LEDs: LEDs for power and current limit status.
n 11 pin connector block on -SL models: Same terminal block that was used on earlier “SL” drives.
(Pin layout may vary).
n 22kHz switching frequency: A high switching frequency means a quieter motor!
n Additional features on -SL models: DC field supply and on board line fuse.
Typical Applications
1/100 to 1/4 Hp
PWM DC
n Medical Equipment
n Office Machinery
n Food Processing
n Packaging Equipment
XP-SL Series
XP-SL Series Specifications
XP01-115AC-SL
XP03-115AC-SL
115
115
0 - 130
0 - 130
1
3
1/100 - 1/25
1/20 - 1/4
100
1.05
100
Field Voltage
(VDC)
Output
Current (ADC)
Output
Voltage (VDC)
Input Voltage
(VAC)
Models
Form
Factor
Hp Rating
1.05
Drives operate from 50 - 60 Hz.
XP-SL Dimensions
All dimensions in inches [millimeters]
3.00
2.625
4.125
4.50
.1875
.1875
For matching DC motors, see pages 37 to 48.
XP-SL Series
Minarik’s XP-SL series is a cost-effective, highly reliable pulse-
width-modulated (PWM) drive that can be used with shunt
wound, series and permanent magnet motors. It replaces
Minarik’s SL drive series that was an SCR drive designed for
shunt wound motors.
PWM technology allows for a wider speed range and lower form
factor than SCR technology. This means that the XP-SL is capa-
ble of running motors at lower speeds without an increase in
motor temperature as is common with SCR drives.
XP01-115AC-SL
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES