Specifications

FEATURES & BENEFITS
n MM footprint: An extremely compact size in an industry standard mounting footprint.
n Low cost: Designed for OEM applications.
n Speed range and regulation: 1% regulation over 80:1 speed range.
n User adjustable calibration pots: IR compensation, max speed, current limit and acceleration/deceleration.
n Stopping modes: Decelerate to a stop (N.O.) or add dynamic braking switch and resistor.
n Spade terminals: Easy to use, lower cost, and able to fit in a smaller package.
n 22kHz switching frequency: A high switching frequency means a quieter motor!
n Accepts AC or DC input: Can accept 100-160VDC input voltage or 70-130VAC.
n Options: “-Q” option adds a cage-clamp type terminal block and on-board fusing.
6
1
1/20 to 1 Hp
PWM DC
XP Series
XP02-115AC
XP Dimensions
All dimensions in inches [millimeters]
3.58
[91]
2.15
[55]
1.28
[33]
0.97 [25]
1.75
[44]
0.19
[5]
0.19
[5]
0.65
[16]
0.74 [19]
3.80 [97]
3.64 [93]
1.75 [44]
0.74 [19]
3.80 [97]
4.30 [109]
3.80 [97]
3.80 [97]
1.35
[34]
H
Six mounting slots 0.19 [5] wide x 0.34 [9] deep
1.03 [26]
4.30 [109]
4.30 [109]
XP02-115AC-Q
All other models
For matching DC motors, see pages 37 to 48.
Specifically designed for the original
equipment manufacture (OEM), the XP
Series of DC motor speed drives provide
high performance at a low cost. These
drives are well suited for XL drive candi-
dates who do not need all of its features.
The XP takes an AC line input, rectifies it
and filters the output to create a DC bus
that is chopped by pulse-width-modula-
tion (PWM) circuitry to provide nearly
pure DC power to the motor. The result
is a form factor of 1.05 or less through-
out the entire 80:1 speed range; com-
pared to a 1.37 form factor from stan-
dard unfiltered SCR drives. The near
unity form factor results in smooth, quiet,
cool and low maintenance motor opera-
tion. In addition, the low form factor
allows drives to operate lower voltage
motors without additional circuitry.
XP drives are versatile. They can accept
any AC voltage between 70 and 130
VAC. XP drives contain a unipolar power
supply, which enables the drive to accept
DC (100 - 160 VDC); unlike typical
transformer-coupled drives. Depending
on your application needs, these drives
will provide speed control for motors
ranging from 1/20 through 1 Hp.
Typical Applications
n Medical Equipment
n Office Machinery
n Food Processing
n Packaging Equipment
n Treadmills
XP Series Specifications
*Needs heatsink model number 223 - 0159 above 5 amps. Drives operate from 50 - 60 Hz.
XP02-115AC
115
0 - 130
2.0
1.05
1.05
1.05
1.05
1/20 - 1/4 @ 130 VDC
No
No
1.77 [45]
2.15 [55]
2.36 [60]
2.88 [73]
Yes
Yes
No
No
No
No
1/20 - 1/4 @ 130 VDC
1/4 - 1/2 @ 130 VDC
1/2 - 1 @ 130 VDC
2.0
5.0
10.0*
0 - 130
0 - 130
0 - 130
115
115
115
XP02-115AC-Q
XP05-115AC
XP10-115AC
Models
Input Voltage
(AC or DC)
Output Voltage
(VDC)
Max. Output
Current (ADC)
Form Factor
Hp Rating
Terminal
Block
Fused
Height
Dimensions (H)
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES