Specifications

1/20 to 3 Hp
PWM DC
5
1
FEATURES & BENEFITS
n Speed range and regulation: 1% regulation over 100:1 speed range.
n User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration,
deceleration and jog (XL3300A only).
n Diagnostic LEDs: LEDs for power and current limit status.
n Inhibit terminals for stopping: Allows users to remotely coast the drive to a stop.
n Cage clamp terminal block: Quick and easy wire terminations reduce installation time!
n 22 kHz switching frequency: A high switching frequency means a quieter motor!
n AC input/DC output switches: Allows the selection of the lower voltage (0-130VDC) DC output for either the 115
or 230 VAC input selection.
n Additional features: Dual voltage AC input, DC field supply and on board line fuse.
XL3025A
Typical Applications
n Medical Equipment
n Office Machinery
n Pumps
n Packaging
n Exercise Equipment
n Specialty Machinery
XL Series Specifications
*Needs heatsink model number 223 - 0271 above 5 amps. Drives operate from 50 - 60 Hz.
XL3025A
120/240
0-130 or 0-240
3.0
50/100/200
(1 amp)
50/100/200
(1 amp)
50/100/200
(1 amp)
50/100/200
(1 amp)
1/20 - 1/4 @ 130 VDC or
1/8 - 1/3 @ 240 VDC
N/A
1.05
2.25 [57.2]
3.00 [76.2]
3.75 [95.3]
3.92 [99]
N/A
1.05
N/A
1.05
0 - 120%
1.05
1/8 - 1/2 @ 130 VDC or
1/4 - 3/4 @ 240 VDC
1/4 - 1 @ 130 VDC or
1/2 - 2 @ 240 VDC
1/4 - 1 1/2 @ 130 VDC
or 1/2 - 3 @ 240 VDC
5.0
10.0*
15.0
0-130 or 0-240
0-130 or 0-240
0-130 or 0-240
120/240
120/240
120/240
XL3050A
XL3200A
XL3300A
Models
Input Voltage
(AC/DC)
Output Voltage
(VDC)
Max. Output
Current (ADC)
Field Supply
(VDC)
Hp Rating
Jog Speed
(% of rated)
Form
Factor
Height
Dimensions (H)
XL Dimensions
9.78
[248]
7.00
[178]
1.39
[35]
6.30 [160]
3.92 [99]
6.90 [175]
0.13 [3]
4.97 [126]
4.13 [105]
0.25 [6]
5.13 [130]
1.75 [44]
H
5.38 [137]
0.50
[13]
0.87
[22]
0.19 [5]
6.90 [175]
All dimensions in inches [millimeters]
See table above for height “A”.
XL3300A
All other models
For matching DC motors, see pages 37 to 43.
Minarik’s XL Series of filtered pulse-width-modulated (PWM) variable-
speed DC drives provide exceptional performance. They output nearly
pure DC power to brush-type motors ranging from 1/20 to 3 Hp. Drives
accept 120 or 240 VAC input to output 0 to 130 or 240 VDC, respec-
tively; resulting in higher speeds from standard 90 or 180 VDC SCR
duty motors. This innovative technology lets users operate many low
voltage motors with only minor calibration adjustments.
MOSFET power devices switch at 22 kHz, which is above the audible
range, to provide fast circuit response and a constant 1.05 form factor
over the entire 100:1 speed range. Highly-efficient XL drives provide
cool, quiet motor operation with extended brush life and low mainte-
nance. For convenience, the drives have a cage-clamp terminal block
to make wiring easy. The XL3300A can jog motors from 0 -120% of
rated speed with a separate trimmer pot.
XL Series
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES