Specifications

1/20 to 2 Hp
PWM DC
FEATURES & BENEFITS
n MM footprint: An extremely compact size in an industry standard mounting footprint.
n Speed range and regulation: 1% regulation over 100:1 speed range.
n User adjustable calibration pots : IR compensation, min speed, max speed, current limit, acceleration and deceleration.
n Diagnostic LEDs: LEDs for power and current limit status.
n Inhibit terminals for stopping: Allows users to remotely coast the drive to a stop (isolated on “-PCM” version).
n Spade terminals: Easy to use, lower cost, and able to fit in a smaller package.
n 16.5 kHz switching frequency: A high switching frequency means a quiet motor!
n Auto-ranging power supply: Accepts AC or DC input in the 115-230V range.
n Options and accessories: “-PCM” option adds isolation for the speed reference input and the inhibit pins.
Typical Applications
Minarik has always been a leader in providing low-cost
PWM motor controls. With the MMXL Series, we have
done it once again! We have taken a full-featured PWM
drive and reduced it down to the standard MM footprint
(4.30" x 3.64").
Not only did we keep all of the features of the larger XL
Series, but we even added optical isolation to the speed
circuit and the inhibit circuit in the
“ -PCM” model. This means that the speed can be con-
trolled with any 0-5 VDC signal and many drives can be
inhibited with a single contact closure. The auto ranging
power supply allows the user to apply 120 or 240 VAC
without adjusting any switches. The full-featured MMXL is
one of the smallest PWM drives on the market today!
MMXL05-D240AC-PCM
n Conveying
n Printing
n Exercise Equipment
n Film Processing
n Winding Machinery
n Packaging
MMXL Series Specifications
Models
Input Voltage
(VAC)
Output Voltage
(VDC)
Max. Cont.
Output (ADC)
Hp Rating
Form Factor
MMXL02-D240AC
120/240
0–130/0–240
2
1.05
1.05
1.05
Height
(A)
2.5
3.2
3.9
1/20 - 1/4 @ 90 VDC
1/10 - 1/2 @ 180 VDC
1/4 - 1/2 @ 90 VDC
1/2 - 1 @ 180 VDC
1/2 - 1 @ 90 VDC
1 - 2 @ 180 VDC
5
10*
Isolation
Optional
Optional
Optional
0–130/0–240
0–130/0–240
120/240
120/240
MMXL05-D240AC
MMXL10-D240AC
MMXL Series
*Needs heatsink model number 223-0159 above 5 amps. Drives operate from 50 - 60 Hz.
MMXL Dimensions
All dimensions in inches [millimeters]. See table above for height “A”.
3.64
[93]
1.75
[44]
0.74 [19]
0.19 [5]
1.55 [34]
A
1.03 [28]
3.80 [87]
4.30 [109]
For matching DC motors, see pages 37 to 43.
4
1
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
B
PWM DRIVES