Specifications

1
1
FEATURES & BENEFITS
1/8 to 2 Hp
SCR DC NEMA 4X
The Patriot Series provides a reliable and economical solution for vari-
able speed control of permanent magnet, or shunt wound brush DC
motors from 1/8 to 2 horsepower.
Housed in a NEMA 4X enclosure, the dual voltage Patriot series is ideal
for washdown applications and provides protection from corrosive
material, windblown dust and incidental contact.
Included is power and current limit LEDs, line fuses, inhibit pins for
remote start/stop, and a speed adjust knob mounted on the front cover.
In addition, the MC10 model includes an On/Off switch on the front
cover; the MC10-R model- a Forward/Off/Reverse switch; and the
MC10-PCM model- an On/Off switch and a Manual/Signal switch.
Setup is easy with the necessary trimmer pots and a screw terminal
block for easy wire connections. The MC10-PCM model also includes
shunt resistor terminals if scaling of the current signal is desired.
With excellent control and a plastic NEMA 4X enclosure, the Patriot
Series is the perfect solution for many applications that require an
enclosed drive.
n NEMA 4X enclosure: Plastic enclosure protects against outer corrosive material and incidental contact.
n Speed range and regulation: 1% regulation over 60:1 speed range.
n User adjustable calibration pots: IR compensation, minimum speed, maximum speed, torque limit, acceleration, and
deceleration. The MC10-PCM unit also has signal min and signal max pots.
n Diagnostic LEDs: LEDs for power and current limit status.
n Mounted operators: Speed adjust knob located on front of case for easy operation. MC10-R includes direction switch
and MC10-PCM includes signal/manual switch.
n Screw and spade terminal: Quick and easy wire terminations.
n Inhibit terminal: Allows users to remotely coast the drive to minimum speed by closing the contacts.
n Analog input reference: MC10-PCM can accept a 0-10VDC or 1-5mA speed reference. Terminals provided for shunt
resistor is a 4-20mA or other current signal is used.
n Additional features: Dual voltage AC input (115 or 230VAC), AC line fuses, and field voltage for shunt wound motors.
Patriot Series
n Conveyors
n Packaging Equipment
n Printers
n Specialty Machinery
n Food Processing
n Pumps
Typical Applications
For matching DC motors, see pages 37 to 43.
MC10-R
Patriot Series Specifications
Models
Input Voltage
±10%, 50/60Hz
Output
Voltage (VDC)
Field Supply
Voltage
(VDC)
Hp Rating
Signal
Isolation?
MC10
MC10-PCM
No
Yes
No
No
No
Yes
Max Output
Current (ADC)
MC10-R
Patriot Dimensions
115/230 VAC
0-90
or 0-180VDC
(1.37 form factor)
50/100/200
(1 amp)
10.0
Reversing?
1/8 - 1 @ 90 VDC
1/4 - 2 @ 180 VDC
MC10
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
A
SCR DRIVES