Specifications

Drives Description Index
Catalog specification Data Subject to Change Without Notice
FEATURES & BENEFITS
DRIVE
DRIVE
MODEL DESCRIPTION
PG.
PG.
MODEL DESCRIPTION
The LVBL Series are Low Voltage Brushless Open
Chassis drives designed to meet the demands of
today's brushless motors. The compact chassis is easy
to wire and calibrate with its screw-clamp connector
and two trimmer pots for min and max speeds. Input
voltage 24-36 (AC) and 24-48 (DC).
The AC100 Series of variable frequency drives are pro-
grammable and easy to use. These drives are IP20
enclosed and feature nine isolated inputs and out-
puts. Forty-two programmable parameters, DC injec-
tion braking and more. For use with 3-phase AC
induction motors up to 3 Hp.
The AC200 Series are programmable variable frequency
drives for 3-phase AC induction motors up to 20 Hp.
They come in an IP20 enclosure and include 18 iso-
lated inputs and outputs, forty-seven programmable
parameters, DC injection braking and more.
The AC300 and AC400 Series of AC variable frequency
drives are available for 3-phase AC induction motors
up to 60 Hp. They are available in Nema 1, 4, 4X or
Nema 12 enclosures. These drives feature 21 isolated
I/O and fifty-five programmable parameters. The
AC400 includes PID controller for closed loop control.
The BOSS 1Q Series are Brushless Single-Quadrant
Open Chassis drives for brushless motor control
application ½ to 2 Hp. These drives are compact,
require little or no maintenance, and provide cool
running, quiet motor operation with excellent speed
range (80:1 open-loop). Standard drives output 4, 8,
15 amps continuos with peak currents reaching 200%
of continuous rating for one second.
The MMBOSS Series is a Low Voltage (12-40VDC) DC
Input, DC Output, brushless drive. It includes features
such as reversing, braking, a terminal block and
22kHz switching frequency all in our compact, stan-
dard footprint.
The BOSS-CM Series was designed for use with front-
end servo controllers. It is an isolated unit that will
accept an analog or PWM reference signal. It accepts
either an AC or DC input voltage and controls brush-
less DC motors. The BOSS-CM is a four-quadrant drive
with 3kHz bandwidth resulting in a very responsive
servo system.
The BOSS-4Q Series are Brushless Four-Quadrant Open
Chassis Drives for brushless motors 1/2 to 2 Hp.
These drives can be run in four different modes:
Voltage mode, velocity mode, tach mode, and current
mode. A removable daughter card provides diagnostic
outputs for run/stop indication, speed signal, aver-
age RMS current signal and phase current signal.
Brushless systems require little or no maintenance
and provides cool running, quiet motor operation
with excellent speed range.
The MAC Series AC drives control any ¾ or smaller,
115 or 230 VAC 3-phase AC induction motor. To help
improve AC motor performance, the MAC Series
includes torque boosting during acceleration,
adjustable torque at low speeds, adjustable slip com-
pensation, and adjustable min and max speeds. Solid-
state reversing, adjustable acceleration and decelera-
tion, I2T class current trip to protect the motor, con-
trol and machine.
26
27
29
31
32
33
53
54
56
55
59
68
69
70
72
71
BOSS15-115AC-4Q
MMBOSS05-24DC-1Q
BOSS15AC-1Q
LVBL02-24AC/DC
MAC05-D240AC
ACM100 Series
AC200 Series
BOSS15-115AC-CM
The RG5500U is a dual voltage, isolated four quadrant
regenerative drive. This full featured drive has nine cal-
ibration posts, on board fusing and a terminal block. It
can accept analog or current input reference signals
and an analog tach for improved speed regulation.
The RG60U is a compact, dual voltage, full-featured
regen drive rated at 1hp (2hp with heatsink). Included
are enable and inhibit terminals with an invert option,
nine trimmer pots - including forward and reverse inde-
pendent adjustments for acceleration and torque.
The RG60U has two option cards available: (-T for
torque control and -PCM adds isolation. The RG60U’s
robust design is ideal for high-duty cycle reversing and
braking applications.
RG5500U
RG60U
The MMRG Series are extremely compact, full-wave,
four-quadrant SCR Regen Open Chassis drives for
1/20th to 2 Hp DC brushed motors. These drives are
excellent for Reversing and Braking applications with
high duty cycles. Both 115 and 230 models available.
28
MMRG31U
The MMRGD Series are extremely compact, dual volt-
age SCR Digital Regen Open Chassis drives for 1/20th
to 2 Hp DC brushed motors. These drives are excellent
for Reversing and Braking applications with high duty
cycles.
MMRGD03-D230AC
The RG25U Series and RG51UA drives are half- wave,
regenerative SCR drives. These drives offer the benefits
of a low cost four-quadrant drive in a compact pack-
age and are ideal for low duty cycle applications.
30
RG25U
The RGT Series features full-wave, four-quadrant
operation in a PWM Regen Open Chassis drive for
1/20 to 2 Hp DC brushed motors. These drives are
excellent for high speed regenerative braking and
reversing. The "T" stands for "trimmed down" features
for streamlined applications and high volume.
Available in 115 and 230 VAC.
RGT300U
The NRG-4Q Series features dual voltage, full-wave,
four-quadrant operation in a PWM Regen Open Chassis
drive for 1/20 to 1.5 Hp DC brushed motors. These dri-
ves are excellent for high speed regenerative braking
and reversing and maintain a low 1.05 form factor. The
NRG-4Q Series also lowers audible noise and provides
longer brush life for your motor.
NRG-4Q
The NRG-2Q Series features dual voltage, full-wave, two-
quadrant operation in a PWM Regen Open Chassis drive
for 1/20th to 1.5 Hp DC brushed motors. These drives
increase motor response while reducing your energy
costs. The NRG-2Q Series also lowers audible noise and
provides longer brush life for your motor.
The VFD-PCM Series has three NEMA 4X enclosure choic-
es rated to 4A or an open chassis unit rated to 5A.
Features include isolated front end, minimum speed
adjustment potentiomer, DC injection braking, automat-
ic or manual restarts and a “doubling” jumper.
NRG-2Q
The RG Series consists of dual voltage, full-wave,
four-quadrant operation in a PWM Regen NEMA 4X
Enclosure with membrane panel for 1/20th to 2 Hp
DC rushed motors. Applications with overhauling
loads, rapid deceleration, basic positioning and high
duty cycles with reversing and braking with benefit
from the RG Series. The NEMA 4 Enclosure protects
the drive from accidental contact, liquids, falling
objects and corrosive agents.
The C1RGD Series is our low cost solution for SCR
Digital Regen NEMA1 enclosed drives for 1/20th to
1HP DC brushed motors. These drives are dual volt-
age and have three different braking modes: regen-
erative brake, regenerative deceleration and coast.
The NEMA 1 enclosure protects the drive from acci-
dental contact and falling objects.
The VFD Series has several compact units available in
the 1/4 to 1 Hp range for 115 or 230VAC input. Some
models can provide a 230VAC output with a 115VAC
input. All models include six trimmer pot adjustments
and three LEDs. The carrier frequency is an adjustable
4-16kHz and the output frequency is 30-120Hz
adjustable. An optional plug-in isolation board is
available that accepts 0-5VDC, 0-10VDC or 4-20mA
reference signals. Use the VFD series for your variable
frequency AC motor requirements.
34
35
36
50
-
52
RG500A
RG501A
C1RGD03-230AC
VFD04-230AC
VFD-PCM Series
AC300 & AC400
Series