Specifications

Drives Description Index
2 41
FEATURES & BENEFITS
DRIVE
MODEL DESCRIPTION
PG.
DRIVE MODEL DESCRIPTION
PG.
The M1 Series is a very compact drive rated up to
1/2hp (1hp with heatsink). The M1 has a chip
that can be factory pre-programmed for custom
trimmer pot ranges. The M1 includes an inhibit
function, a jumper to calibrate for smaller motors
(1/15 to 1/8 hp), six trimmer pots and a wide IR
compensation range. Extremely compact size and
programmability make the M1 perfect for both
OEMs and Users.
The M2 Series provides the power of two drives in
one. Independently control two different DC motors
in speed or torque control. In the speed control
mode, you can run the two motors indepently or in
ratio to each other. In ratio mode, the drive
replaces two drives and a master/follower card too.
The M2 drive is microprocessor based and can be
customized without hardware changes.
The RG Series consists of dual voltage, full-wave,
four-quadrant operation in a PWM Regen Open
Chassis drive for the 1/20th to 2 Hp DC brushed
motors. Applications with overhauling loads, rapid
deceleration, basic positioning and high duty
cycles with reversing and braking will benefit from
the RG Series. Also available with isolation option.
The MMXL Series are extremely compact, dual
voltage PWM Open Chassis drives for 1/20th to 2
Hp DC brushed motors. The MMXL Series lowers
audible noise and provides longer brush life for
you motor. These drives maintain a 1.05 form fac-
tor at any speed in a 100:1 speed range. This
means a decrease in motor temperature and motor
maintenance.
The XL Series are dual voltage, PWM Open Chassis
drives for 1/20th to 3 Hp DC brushed motors.
These highly-efficient drives provide cool, quiet
motor operation with extended brush life and low
maintenance. For convenience, the drives have a
cage-clamp terminal block for easy wiring.
The XP Series are PWM Open Chassis drives for
1/20th to 1 Hp DC brushed motors. Specifically
designed for the OEM, the XP Series provides
high performance at a low cost. The near unity
form factor results in smooth, quiet, cool and
low maintenance motor operation. Well suited for
XL candidates that do not need all the features.
The XP-SL Series are cost-effective, PWM Open
Chassis drives for 1/100th to 1/4 Hp DC brushed
motors. These drives can be used with shunt
wound, series and permanent magnet motors. The
PWM technology used in the XP-SL Series is capa-
ble of running motors at lower speeds without an
increase in motor temperature.
Designed for battery operated electric vehicles using
separately excited 36-48VDC DC motors. Rated for
200A continous armature current and peak of 500A
for two minutes. Features include rollaway protec-
tion, battery under-voltage control, reverse alarm
signal, regenerative braking fault detection, protec-
tion from overheating and outputs for an hour meter
and speedometer
DC input, DC output drives available in three sizes:
Sixteen and 60A units for 12 or 24VDC motors and
a 60A unit for 36 or 48VDC motors. The DC Series
includes an inhibit, power LED, and six trimmer pot
adjustments. Extruded chassis for better heat trans-
fer to the heatsink, more bus capacitance to handle
ripple currents and a convenient screw terminal
block for power wiring.
The XP DC Series are cost-effective, PWM Open
Chassis drives for 1/50th to 1 Hp DC brushed DC
motors. Designed for applications running from a
DC power supply or battery power input, the XP
DC Series operate low voltage motors from 12 VDC
to 60 VDC, up to 32 amps. PWM circuitry results
in quick response and a constant 1.01 form factor
through the 80:1 speed range.
The PCMXP Series are low-cost, high performance
PWM Isolated Open Chassis drives for 1/20 to 1
Hp DC brushed motors. These drives accept any
external analog process control from 0 to 10 VDC.
Operates in three modes: manual, signal and sig-
nal with ratioing. PCMXP drives are available in 2,
5 and 10 amp versions.
2
3
4
6
5
7
9
8
10
11
12
15
14
16
17
20
19
18
21
22
24
25
23
M1
RG500UA
MMXL05-D240AC-PCM
XL3025A
XP02-115AC
XP01-115AC-SL
DC5004Q-36/48
DC60-36/48
PCMXP02-115AC
C1XP Series are PWM NEMA 1 Enclosure drives for
1/100 to ¼ Hp DC brushed motors. PWM technol-
ogy allows the drives to yield a constant 1.05
form factor over the 80:1 speed range resulting
in smooth, quiet, cool and low maintenance
motor operation.
The MM23000C Series are reliable, cost-effective
dual voltage SCR Open Chassis drives for 1/20 to 1
Hp DC motors. These drives are an excellent solu-
tion for controlling permanent magnet or shunt
wound DC motors in variable speed applications.
The MM23000D Series are reliable, cost-effective
dual voltage SCR Open Chassis and Enclosure drives
for 1/20 to 2 Hp DC motors. The MM23000D Series
contains a user-selectable inhibit circuit so the user
can adjust the function of the inhibit with jumper
pins. The MM23002D can operate in either speed or
torque control mode.
The MM Series are dual voltage SCR Isolated Open
Chassis drives for 1/20 to 5 Hp DC brushed motors.
The MM Series have integrated isolation allowing
them to precisely follow analog current or voltage
signals from external devices or a potentiometer.
The drives also contain built-in diagnostics and
built-in fuse block.
The MM31700 Series are low cost SCR open
chassis drives designed for OEMs. They control
1/50-1/8 Hp DC brush motors with minimal fea-
tures resulting in a compact package. The drives
are available with or without a mounted speed
potentiometer.
SCR Isolated Open Chassis drives for 1/20 to 1 Hp
DC brushed motors. The MM-PCM drives accept non-
isolated voltage (0-10VDC) or current (4-20mA)
signals coming from an in-plant process, PLC,
motion controller, etc. to control speed. Quick con-
nect terminal block for easy wiring.
The PCM20000A Series are SCR Isolated Open
Chassis drives for 1/20 to 2 Hp DC brushed motors.
These drives integrate isolation allowing them to
accept external analog process control signals.
Users can operate the drives in manual mode using
normal potentiometer operation or in signal mode
where drive output is proportional to an external
signal output.
The C4XL Series are dual voltage, high performance
PWM NEMA 4X Enclosure drives for 1/20 to 2 Hp
DC brushed motors. PWM technology allows the
drives to yield a constant 1.05 form factor over the
100:1 speed range resulting in smooth, quiet, cool
and low maintenance motor operation. Enclosure
protects the drive from accidental contact, liquids,
falling objects and corrosive agents.
The MM20000 Series are SCR NEMA 1 Enclosure
drives for 1/20 to 2 Hp DC brushed motors.
These drives have non-regenerative reversing
and dynamic braking capability accessible
through switches on the front of the enclosure.
Six different units available. The NEMA 1
Enclosure protects the drive from accidental con-
tact and falling objects.
The Patriot Series provides a reliable, economical
solution for controlling permanent magnet or shut-
wound DC motors. NEMA 4X enlcosure, ideal for
washdown applications and protection from con-
tact. Reversing (-R) and isolated (-PCM) models
also available.
The MM23400C Series are SRC NEMA 4X Enclosure
drives for 1/20 to 2 Hp DC brushed motors. These
stand alone drives contain a power neon light, a
pre-mounted heatsink, a power switch and speed
adjustment knob accessible from the front of the
enclosure. Using full-wave rectification of the AC
line input, these drives provide a 60:1 speed
range.
The PCM23400A Series are SRC Isolated NEMA 4X
Enclosure drives for 1/20 to 2 Hp DC brushed
motors. These full-wave rectified drives are a cost -
effective solution for variable speed, process con-
trol applications requiring protection from wash-
down, dirt and other corrosive elements. For added
versatility, these drives have integrated isolation.
13
PCM23401A
MM23401C
MM23201C
Patriot
C1XP01-115AC-A
C4XL3200A
MM23001C
MM23002D
MM501U
MM31750B
MM03-115AC-PCM
PCM21000A
Minarik’s LV Series of variable speed drives for
your fractional horsepower, low voltage DC motor
(12 and 24 VDC) using filtered pulse-width mod-
ulation (PWM). Compact, low cost drives are
designed to provide 2% speed regulation through-
out a 100:1 speed range.
LV Series
M2
XP32-12/24DC
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com