Specifications

8
0
1/50 to 2 Hp
Isolated SCR DC
FEATURES & BENEFITS
Typical Applications
n MM footprint: An extremely compact size in an industry standard mounting footprint.
n Isolated inputs: Accepts floating or grounded signals of 0-10VDC or 4-20mA for controlling the speed of the motor.
Burr-Brown isolation provides .01% linearity.
n Speed range and regulation: 2% regulation over 60:1 speed range.
n User adjustable calibration pots: IR compensation, min speed (12 turn), max speed (12 turn), current limit,
acceleration and deceleration.
n Diagnostic LEDs: LEDs for power, run, inhibit, and current limit status.
n Stopping modes: Choose N.O. or N.C. terminals to remotely decelerate to a stop by either closing or opening contacts.
Decelerate to min speed via the pot circuit. Coast to stop by removing power. External dynamic braking can be added.
n Quick disconnect terminal: Allows users to easily wire or switch controllers.
n Additional features: On-board line fusing.
Similar to our MM23001C Series in length and width, the “piggy-
back” design allows for many features in a small package.
The MM-PCM Series drive accepts non-isolated voltage (0-10VDC)
or current (4-20mA) signals coming from an in-plant process, pro-
grammable logic controller, motion controller, etc. to control speed.
A quick connect removable terminal block allows users to quickly
detach the drive without disconnecting the wires from the terminal
block. Also included are optically-isolated normally-closed stop
and normally-open start inputs. These allow remote starting and
stopping of the motor with switches or pushbuttons.
MM03-115AC-PCM
MM-PCM Series Specifications
MM03-115AC-PCM
115
90
3
1/50 - 1/8
1/8 - 1
1/25 - 1/4
1/4 - 2
10*
3
10*
90
180
180
115
230
230
MM10-115AC-PCM
MM03-230AC-PCM
MM10-230AC-PCM
Models
Input Voltage
(VAC)
Output Voltage
(VDC)
Max. Output
Current (ADC)
Hp Rating
*Use heatsink #223-0159 above 5 amps. Drives operate from 50 - 60 Hz.
n Leader/Follower
System
n Office Machinery
n Conveyors
n Packaging Machinery
n Printers
n Robotics and Specialty
Machinery
MM - PCM Dimensions
For matching DC motors, see pages 37 to 43.
0.74 [19]
1.28 [33]
2.16 [55]
0.97 [25]
3.80 [97]
4.30 [109]
0.65
[16]
0.19
[5]
0.19
[5]
4.30 [109]
3.80 [97]
1.75 [44]
3.55
[91]
3.91
[99]
All dimensions in inches [millimeters]
MM-PCM Series
Call us toll free 1•800•MINARIK or download manuals at www.minarikdrives.com
A
SCR DRIVES