Technical data

with BMW Motorrad Integral
ABS Generation II
OE
Unclip two retaining clips 1 of
sensor cable on brake line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
left and right brake calipers.
Push brake pads 3 apart
slightly by turning the brake
caliper 4 back and forth against
the brake rotor 5.
Carefully pull brake calipers
back to remove them from the
brake rotors.
8
96
z Maintenance