Technical data

In order to ensure the operating
reliability of the brake system,
make sure that the brake pads
are not worn beyond their mini-
mum thickness.
Have the brake pads replaced
by a specialist service facility,
preferably an authorized BMW
Motorrad retailer.
Checking front brake fluid
level
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.
Check brake fluid level
regularly.
Make sure ground is level and
firm and hold motorcycle verti-
cally.
with center stand Generation
II
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Move handlebars into straight-
ahead position.
Read off brake fluid level at
brake-fluid reservoir 1.
The brake fluid level in the
brake-fluid reservoir drops
due to brake pad wear.
Front brake fluid level
Brake fluid (DOT4)
The brake fluid level must
not fall below the MIN mark.
(Brake fluid reservoir hor-
izontal, motorcycle stand-
ing upright and handlebars
straight ahead)
If brake fluid level falls below the
approved level:
Have the defect corrected as
soon as possible by a special-
ist service facility, preferably an
8
91
z Maintenance