Technical data

ASC functionality is no longer
available.
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Breaking in
The first 600 mls
(1000 km)
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently; avoid driving for long
periods at a constant speed.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing highways if possible.
Observe the engine run-in
speeds.
Engine run-in speed
<7000 min
-1
Have the first inspection carried
out after 300 - 750 mls (500 -
1200 km).
Brake pads
New brake pads must be run in
before they achieve their opti-
mum friction force. This initial
reduction in braking efficiency
can be compensated for by ex-
erting greater pressure on the
brake levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Brake early.
Tires
New tires have a smooth sur-
face. This must be roughened by
riding in a restrained manner at
various heel angles until the tires
are run in. This running in proce-
dure is essential if the tires are to
achieve maximum grip.
New tires have not
achieved their full adhesion
yet. There is a danger of
accidents when driving at
extreme angles.
Avoid extreme angles.
Shifting gears
with gearshift assistant
OE
Gearshift assistant
Your motorcycle is equipped with
a shifting assistant developed
based on racing requirements. It
enables upshifting without actu-
ating the clutch or throttle valve
in virtually all load and engine
5
65
z Riding