Technical data

Press starter button 1.
The start attempt is auto-
matically interrupted if bat-
tery voltage is too low. Recharge
the battery before you start the
engine, or use jump leads and a
donor battery to start.
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. ( 120)
Pre-ride check
The instrument cluster runs a
test of the 'General' warning light
when the ignition is switched on:
this is the "Pre-Ride-Check" The
test is aborted if the engine is
started before it is completed.
To initialize, the exhaust flap is
completely opened once then
closed again.
Phase 1
General warning light shows
red.
CHECK!is indicated.
Phase 2
General warning light shows
yellow.
CHECK!is indicated.
If the 'General' warning light does
not show:
Some malfunctions cannot
be indicated if the 'Gener-
al' warning light cannot be dis-
played.
Check that the 'General' warning
light comes on, and that it shows
red and yellow.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
with BMW Motorrad Integral
ABS Generation II
OE
The self-diagnosis routine is de-
termining whether the BMW
Motorrad Integral ABS is ready
for operation. The self-diagno-
sis routine launches automatically
when you switch on the ignition.
5
63
z Riding