Technical data

The selected suspension damp-
ing rate appears in the multifunc-
tion display area 1, while the load
type is shown in the 2 sector.
The displays provide the follow-
ing information:
COMF: Comfortable damping
NORM: Normal damping
SPORT: Sport, performance-
oriented damping
One-up
One-up with luggage
Two-up (with luggage)
The display is automatically
hidden again after a short time.
Adjusting the suspension
Start engine.
Press the button 1 to view the
current adjustment setting in
the display.
To reset the suspension's
compliance rate, press the 1
button briefly, then continue
to press it repeatedly until the
desired suspension setting
appears in the display.
The damping can be ad-
justed while the motorcycle
is being ridden.
To set the weight, apply ex-
tended pressure on the 1 but-
ton, pressing it repeatedly until
the desired setting appears in
the display.
The load setting cannot be
adjusted while the motorcy-
cle is underway.
If the 1 button is not pressed
for an extended period of time,
the current display settings for
suspension's damping rate
and the load weight will be
adopted. The ESA display then
goes out automatically.
4
55
z Operation