Technical data

Mirrors
Adjusting mirrors
Move mirror into desired posi-
tion by twisting.
Adjusting mirror arm
Slide protective cap 1 up over
screw connection on mirror
arm.
Loosen nut 2 (left-hand
thread).
Turn mirror arm into desired
position.
Tighten nut to specified torque
while holding mirror arm in
place.
Mirror on left/right
adapter
16 lb/ft (22 Nm)
Slide protective cap over
threaded fastener.
Spring preload
Setting
It is essential to set spring
preload of the rear suspension
to suit the load carried by the
motorcycle. Increase spring
preload when the motorcycle is
heavily loaded and reduce spring
preload accordingly when the
motorcycle is lightly loaded.
Adjusting spring preload
for rear wheel
Make sure ground is level and
firm and park motorcycle.
4
52
z Operation