Technical data

Press and hold button 1 until
ASC symbol changes its dis-
play behavior.
ASC symbol is displayed.
Release button 1 within two
seconds.
ASC symbol continues to
be displayed.
ASC function is deactivated.
Activating ASC function
Press and hold button 1 until
ASC symbol changes its dis-
play behavior.
ASC symbol is no longer
displayed; if self-diagnosis
is not completed, it begins to
flash.
Release button 1 within two
seconds.
ASC symbol is still not dis-
played or continues to flash.
ASC function is activated.
As an alternative, the ignition
can also be switched off and
then on again.
If the ASC warning light
lights up after switching the
ignition off and on and then con-
tinued driving over 3 mph (5 km/
h), an ASC error has occurred.
Clutch
Adjusting clutch lever
Changing the position of
the clutch-fluid reservoir
can allow air to penetrate the
clutch system.
Do not turn the handlebar fitting
on the handlebar.
Adjusting the clutch lever
while driving can lead to
accidents.
Only adjust the clutch lever when
the motorcycle is stationary.
4
50
z Operation