Technical data

Possible cause:
The ABS system has been deac-
tivated by the driver.
Switch on ABS function.
ABS error
with BMW Motorrad Integral
ABS Generation II
OE
ABS warning light lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
Continued driving is possible
while taking the failed ABS
function into account. Observe
additional information on situa-
tions which can lead to an ABS
error ( 73).
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
with automatic Stability Con-
trol
OE
General warning light
flashes rapidly in yellow.
ASC symbol is displayed.
The ASC has detected insta-
bility at the rear wheel and has
reduced the torque. The warn-
ing light flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with optical feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
ASC self-diagnosis not
completed
with automatic Stability Con-
trol
OE
ASC symbol flashes.
Possible cause:
The self-diagnosis was not com-
pleted; the ASC function is not
available. So that the ASC self-
diagnosis can be completed, the
engine must be running and the
motorcycle must be moved at a
speed of at least 3.1 mph (5 km/
h).
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.
ASC deactivated
with automatic Stability Con-
trol
OE
3
34
z Status indicators