Technical data

An incorrect disconnection
sequence increase the risk
of short-circuiting.
Always observe the proper
sequence.
Remove negative cable 1 first.
Then remove positive cable 2.
Unscrew screws 3 and pull re-
taining bracket toward rear.
Lift battery upwards; if it is dif-
ficult to move, moving it back
and forth will help.
Installing battery
Place battery in battery com-
partment, positive terminal on
right in direction of travel.
Push retaining strap over bat-
tery and install screws 3.
An incorrect installation se-
quence increases the risk
of short-circuiting.
Always observe the proper
sequence.
First install positive battery ca-
ble 2.
Then install negative battery
cable 1.
If the motorcycle was dis-
connected from the bat-
tery for a longer time, the current
date must be entered in the in-
strument cluster to ensure the
proper operation of the service
display.
Consult a certified workshop,
preferably an authorized BMW
Motorrad retailer, for setting of
the date.
Installing battery compartment
cover ( 114).
Setting clock ( 42).
Removing battery
compartment cover
Make sure ground is level and
firm and park motorcycle.
8
113
z Maintenance