Technical data

Remove screw 1.
Pull lamp housing on screw
connection side out of turn in-
dicator housing.
Press bulb 2 into socket and
turn counterclockwise to re-
move.
Replace defective bulb.
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Press bulb 2 into socket and
install by turning clockwise.
Insert lamp glass in turn indica-
tor housing.
8
109
z Maintenance