Technical data

Remove bulb 3 from bulb
holder.
Replace defective bulb.
Bulb for parking light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Insert bulb 3 into bulb socket.
Install bulb socket in headlight
housing by turning clockwise.
Incorrectly routed headlight
cables can become entan-
gled in the steering.
Secure electrical cables with the
corresponding retaining clips on
the rear wall of the headlight.
Press lamp housing into
mounts 4 on frame.
Install mounting screws 1 on
both sides of lamp housing.
Replacing front and rear
turn indicator bulbs
Make sure the ground is level
and firm and park the motorcy-
cle.
Switch off the ignition.
8
108
z Maintenance