Technical data

Position muffler cover 2 and fit
three screws 1.
without center stand Genera-
tion II
OA
Remove rear wheel stand.
Front wheel stand
Mounting front wheel
stand
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
wheel stand and the rear wheel
alone can fall over.
Place the motorcycle on the cen-
ter stand or an auxiliary stand
before lifting it with the BMW
Motorrad front wheel stand.
Use basic stand with part
number (83 30 0 402 241) in
combination with front-wheel
adapter (83 30 0 402 243).
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 104).
with center stand Generation
II
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Loosen adjusting screws 1.
Push two mounting pins 2 far
enough apart that front sus-
pension fits between them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
8
103
z Maintenance