Technical data

with center stand Generation
II
OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Danger of burns from the
hot exhaust system.
Do not touch the exhaust sys-
tem. If necessary, do not con-
tinue work until the exhaust sys-
tem has cooled down.
Remove three screws 1 on the
muffler cover 2.
Take off cover.
Loosen screw 3 on clamp far
enough that the clip can be
twisted.
Do not remove sealing grease
from clamp.
Remove screw 4 on the rear
footrest while supporting the
end muffler.
First turn the end muffler
downward slightly and then
outward.
8
100
z Maintenance