Owner`s manual

From the position con-
sequent to “short
drop”, side windows
will reclose by keeping the but-
ton pressed at the end of the
complete top opening or closing
operation. Do not close the side
windows by pressing the rele-
vant buttons before completing
the closing operation otherwise
perfect adhesion of side win-
dows to top rubber sealing gas-
kets will not be guaranteed.
85
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
Keep button C pressed according to the
required activation mode (opening or
closing) for the whole operation. The dis-
play will show the corresponding mes-
sage + symbol (fig. 62).
A beep will be heard and the display will
show the relevant message + symbol
after completing the operation.
Stopping the opening/closing
operation
Releasing button C-fig. 61 during
opening/closing, will automatically stop
the top. In this event, the display will
show a warning message + symbol.
The movement operation can be con-
tinued after a few minutes by pressing
the pushbutton again in the direction
wanted (open or close).
HOW TO OPERATE THE TOP
BY HAND IN THE EVENT
OF ELECTRIC FAILURE
Closing the top
In case of need, the top can be closed
manually, proceed as follows:
❒ open the object holder behind the
back rear seat;
❒ work on cable A-fig. 63. The ca-
ble has a slot that can be enabled
with the screw driver included in the
supply that allows to open the hy-
draulic system release emergency
valve. There is also a tag that has
the warnings that allow to avoid ac-
cidental enabling of the cable;
A0G0280g
fig. 62
A0G0287m
fig. 63