Owner`s manual

188
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
❒ close protection B-fig. 41 on light
unit A-fig. 40;
❒ refit the light unit inserting first one
side and then the other one until
hearing the locking click.
A0G0173m
fig. 41
BOOT LIGHT
To change the bulb, proceed as follows:
❒ open the tailgate;
❒ remove the light unit A-fig. 42 lev-
ering in the point shown by the ar-
row;
A
A0G0276m
fig. 42
A0G0204m
fig. 43
❒ open the protection cover B-fig. 43
and replace the bulb releasing it from
the side contacts making sure that
the new bulb is correctly clamped be-
tween the contacts;
❒ re-close the protective cover B;
❒ refit the light unit inserting first one
side and then the other one until
hearing the locking click.