Owner`s manual

186
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
Direction indicators
To replace the bulbs proceed as follows:
❒ open the boot and the lid as de-
scribed previously (see fig. 30);
❒ turn the bulb holder A-fig. 35
counterclockwise, remove the bulb
B and replace it;
❒ refit the bulb holder, it shall click in-
to place; look at the light from the
outside to check for proper bulb po-
sitioning.
A0G0167m
fig. 35
Number plate light
To replace the bulbs proceed as follows:
❒ operate with a flat blade screwdriver
protected by a soft cloth on device A-
fig. 36 to remove the light unit B;
❒ remove the bulb holder C-fig. 37 by
turning it slightly and replace the snap-
fitted bulb D.
A0G0168m
fig. 36
A0G0169m
fig. 37
Additional brake light
(third stop)
To change the bulb (fig. 38), proceed
as follows:
❒ open the tailgate, remove fasteners
A-fig. 39 and remove panel B;
A0G0274m
fig. 38