Owner`s manual

181
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
Main beam headlights
(halogen bulbs)
To change the bulb, proceed as follows:
❒ remove cover A-fig. 22 by turning
it counter-clockwise;
❒ disconnect the electric connector A-
fig. 23;
❒ release the bulb holder catch B;
IF AN EXTERIOR
LIGHT BURNS OUT
For the type of bulb and power rating,
see “When needing to change a bulb”.
FRONT LIGHT UNITS
The front light units contain main beam,
sidelights, direction indicator and dipped
beam bulbs.
To change the bulbs, turn cap counter-
clockwise and then remove it.
The bulbs are arranged inside the light
unit fig. 22 as follows:
A Main beam headlights
B Sidelights/direction indicators
C Dipped beam headlights
A0G0191m
fig. 22
After replacement, re-
fit the covers correctly
checking that they are proper-
ly secured.
WARNING
A0G0223m
fig. 23
❒ remove the bulb and replace it;
❒ fit the new bulb and refit bulb hold-
er catch B;
❒ reconnect the electrical connector A;
❒ refit the protective cover properly.