Owner`s manual
175
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
❒
if after 5 minutes it is still impossi-
ble to reach at least 1.5 bar, disen-
gage compressor from valve and cur-
rent outlet, then move the car forth
for approx. ten metres in order to dis-
tribute the sealing fluid inside the
tyre evenly, then repeat the inflation
operation;
❒
if after this operation it is still im-
possible after 5 minutes to reach at
least 1.8 bar, do not start driving
since the tyre is excessively dam-
aged and the quick tyre repair kit
cannot guarantee suitable sealing,
contact Alfa Romeo Authorized
Services;
❒
loosen tyre inflation valve cap, take
out the filler hose A-fig. 14 and
screw the ring nut B-fig. 15 on the
tyre valve;
❒
make sure the compressor switch A-
fig. 16 is set to 0 (off), start the en-
gine and fit plug A-fig. 17 into the
outlet/cigar lighter on the front con-
sole and then turn on the compressor
by setting switch A-fig. 16 to I
(on);
❒
inflate the tyre to the pressure spec-
ified in paragraph “Wheels” in sec-
tion “Technical Specifications”. Check
tyre pressure on gauge B-fig. 16
with compressor off to obtain precise
reading;
A0G0116m
fig. 14
A0G0214m
fig. 15
A0G0213m
fig. 16
A0G0217m
fig. 17