Owner`s manual

170
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
❒ Loosen the fastening bolts and then
remove the wheel;
❒ Make sure the contact surfaces be-
tween space-saver spare wheel and
hub are clean so that the fastening
bolts will not come loose;
❒ for versions equipped with space-
saver spare wheel, loosen the lock-
ing device A-fig. 4, take out the
tool container B, and take it near the
wheel to be changed then take the
space-saver spare wheel;
❒ Using the wrench provided A-fig.
5 loosen the bolts of the wheel to
be replaced by about one turn;
shake the car to facilitate rim re-
moval from the wheel hub;
❒ Operate the device F-fig. 7 to ex-
tend the jack until the top of the jack
G fits correctly into catch H;
❒ The jack shall be fitted as shown in
fig. 6;
A0G0208m
fig. 7
A0G0272m
fig. 6
❒ Warn anybody nearby that the car is
about to be lifted. They must stay
clear and not touch the car until it
is back on the ground;
❒ Fit the handle L-fig. 7 to operate the
jack and lift the car until the wheel to
be changed is several centimetres off
the ground;
A0G0206m
fig. 5
A0G0019m
fig. 4