User`s manual

Chapter 2 Hardware Configuration
PMB-562LF USER ′ S MANUAL
Page: 2-33
2-38. PCI RISER BOARD INFORMATION
For correctly operation for 3 PCI devices on the PCI slot of PMB-
562LF, the particular PCI riser card must be followed to the following
recommendation. Professional technical consultant may need for
designing the right riser board or purchasing from the same
manufactories’ riser board.
PCI Routing Table
IDSEL INTJ0 INTJ1 INTJ2 INTJ3 REQ# GNT# CLK
AD28 A B C D P_REQJ3 P_GNTJ3 PCI_CLK3
AD29 B C D A P_REQJ4 P_GNTJ4 PCI_CLK4
AD30 C D A B P_REQJ5 P_GNTJ5 PCI_CLK5
2-39. DIGITAL I/O PORT
DIO1 : Digital Input/Output Port
The pin assignments are as follows:
Input Port: Read I/O 440H
Output Port: Write I/O 441H
PIN ASSIGNMENT
1 VCC
2 GND
3 Input bit 0
4 Output bit 0
5 Input bit 1
6 Output bit 1
7 Input bit 2
8 Output bit 2
9 Input bit 3
10 Output bit 3