Operating instructions
HDM-900WD 各部名称と働き
7
HDM-900WD
リアパネル
Rear panel
ANALOG Y(CVBS) / PB(C) / PR connectors (BNC)
Input the analog video signal from a camcorder, etc. Set the INPUT on the MENU to the appropriate
position according to the signal input to the ANALOG Y(CVBS) / PB(C) / PR connectors.
And the input signal stting function can be assigned to the F1 to F9 function buttons.
アナログ ビデオ信号をカムコーダー等から入力します。 入力するビデオ信号に合わせてメニューでセットします。 入力信号の切り
替えをファンクションボタン F1∼F9 に割り振ることができます。
HDMI IN connector
HDMI OUT connector
ACTIVE indication LED
Composite signal Y( CVBS )
Y - C signal Y( CVBS ) - P
B( C )
HD component signal Y( CVBS ) - P
B( C ) - PR
Input signal Input connector
Used to input the HDMI video signal. Select an input signal on the MENU or by Function button.
Used to output the HDMI video signal.
Whenever any signal is input, it is converted to the HDMI signal and the SDI signal, and the signals
are output to the HDMI connector and SDI OUT connector.
Indicates the status of the HDMI IN/OUT connectors input/output to light up to green or red.
HDMI IN/OUTコネクタの入出力の状態を緑/赤に点灯して表示します。
選択されて画面に表示されている入力信号が HDMI 信号に変換されて出力されています。
HDMI 信号を入力します。 入力信号の選択は、メニューまたはユーザープリセットファンクションボタンで行います。
GREEN : When the HDMI OUT connector is connected to anyone and outputs the HDMI signal.
RED : When the HDMI OUT connector is connected to anyone but no signal is output.
OFF : When the HDMI connector is not to anyone.
SDI (3G/HD/SD) OUT connector (BNC type)
Used to output the HD/SD-SDI signal displayed on the screen.
Whenever any signal is input, it is converted to the SDI signal and the HDMI signal, and the signals
are output to the SDI OUT connector or the HDMI connector.
選択されて画面に表示されている入力信号が HD/SD-SDI 信号に変換されて出力されています。
注意/重要事項 :
SDI (3G/HD/SD) OUT コネクタおよび HDMI OUT コネクタの出力は、
入力の切り替え、3G REVIEW, ANAGLYPH, 等のメニューの切り替えを行うと
一時映像信号が途切れることがあります。
CAUTION/IMPORTANT :
The changes of the input signal or the menu, 3G REVIEW, ANAGLYPH, etc.
might cause an interruption of the signal output of the SDI (3G/HD/SD) OUT
connector and HDMI OUT connector.