Technical data

78
Special Developments
Special Developments
HIF tracer heating
For hoses and pipes
Applications:
Frost protection during water analysis, in washing and cleaning sy-
stems, for hose systems in general and as temperature stabilization
for general applications.
The HIF tracer heating series is designed for antifreeze heating,
respectively to compensate for heat losses in hoses and pipes. You
can install HIF easily in your existing hose system. It requires very
little power, since it heats within the medium. It does not require any
expensive attachments or insulation, and you can also heat media
with a low storage capacity as it fl ows.
It can be individually adapted to your requirements.
Operating tempera-
ture:
max. 200°C
Rated voltage:
230 V AC
External thread:
1“, optional ½“
Connector head:
As a closure section with axial cable feed or with
integrated fl ow of the medium via a fi tted tappet
(optional external thread) and side cable feed.
Material connector
head:
1.4305
Heating loop:
Can be cut to size as required, optionally also avail-
able as a double loop.
Special feature:
Tefl on
®
jacket (suitable for corrosive media)
Heating wires:
About 2.5 mm diameter, including insulation and
earth conductor braiding.
Connection cable:
2 m
Protection grade:
IP 54 connection housing or IP 65 cast connection
housing
Protection class:
I
Optional:
The degree of protection: Protective separation or
protective extra-low voltage are possible by means
of suitable isolating transformers. As a special ver-
sion, HIF can also beoperated with control (integral
meauring principle). With this higher capacities
and operating temperatures up to 200°C can be
achieved.
200 °C
Type A Type B