Technical data

62
Flexible Tracer Heaters
Miscellaneous
Heating tape sensor
Thermostatic switch
For simplest control requirement and temperature monitoring.
Technical data
Switching power:
max. 10 A (2300 W)
Switching frequency:
app. 10000 switching cycles
Shutdown point:
±5 K to the rated actuation temperature
Reclosing point:
about 30 ±15 K below the shutdown point
Rated switching temperature
80 °C / 100 °C / 120 °C / 140 °C / 160 °C /
200 °C
Thermocouple fl at sensor +450 °C
with 1.5 m long silicone insulated equalizing cable
Order Nr. Sensor type
HT/FF Fe-CuNi(J)
HT/NF NiCr-Ni(K)
Thermocouple bar sensor +600 / +1000 °C
Mineral insulated, sensor tip bendable, can be soldered, preferably
for use at high temperatures, in fl uids and in corrosive atmospheres,
diameter 1.5 mm, length 250 mm, silicone insulated, 2 m long
equalizing cable
Bestell-Nr.
Fühlerart Max. Temperatur Mantelwerkstoff
HT/FM
Fe-CuNi(J) 600 °C 1.4571
HT/NM
NiCr-Ni(K) 1000 °C 2.4816 (Inconel)
Pt 100-Fühler
+200 °C +250 °C +350 °C +500 °C
Brass Jacket material 1.4571, Jacket material 1.4571
diameter 4 mm, diameter 4 mm, diameter 5 mm,
length 30 mm, length 40 mm, length 40 mm,
PTFE insulated, PTFE/glass fi l. insulated, glass fi lament insulated,
2 m cable 2 m cable 2 m cable
Order Nr. Order Nr. Order Nr.
HTI/MS HTI/PM HTI/PH HTI/PT
Pt 100 also available in ex-proof.
Compensating cables
For extending the connection cables of the temperature sensors
listed above. Structure: silicone/silicone insulated, 2 x 0.25 mm2,
diameter 5 mm
Order Nr. Sensor type
AG/F Fe-CuNi(J)
Self-adhesive sign
Electrically heated, 50 x 200 mm