Technical data

61
Flexible Tracer Heaters
Miscellaneous
Accessories
FIL + 260 °C
Connection wires of CuNi with PFE insulation for wiring in the tem-
perature range up to 260°C, in various colours.
Order Nr. Cross section Supplied unit
FIL/075 0,75 mm
2
10 m
FIL/150 1,50 mm
2
10 m
FIL/250 2,50 mm
2
10 m
Tube of silicone adhesive 25 g Tube of silicone adhesive 100 g
KF-SILT 25 KF-SILT 100
Silicone adhesive in tubes for the manufacture of self-prepared
connections for HKSI heating tapes (silicone adhesive technology).
You need 10 to 15 g adhesive per heating tape.
KA
Porcelain terminals, can be used up to 250°C.
Cross section Supplied unit
1 x 2,5 mm
2
10 Stück
2 x 2,5 mm
2
10 Stück
3 x 2,5 mm
2
10 Stück
4 x 2,5 mm
2
10 Stück
Spring terminals / supporting rails
Designation
Spring terminal, 4 mm
2
, grey
Spring terminal, 4 mm
2
, blue
Spring terminal, 4 mm
2
, gn-ge
Cover plate, 4 mm
2
, grey
Supporting rail, 35 mm
End bracket for supporting rails
Surface mounted switch
3-pin surface mounted switch according to EN 60947,
VDE 0660.
Technical data
Max. switchable voltage:
440 V AC acc. DIN VDE 0106 part 101
Max. continuous current:
20 A
Degree of protection:
IP 65
Cable glands:
4 x PG 16
Housing dimensions:
100 x 80 x 106 mm (H x B x T)
Residual current operated circuit breaker
(RCCB)
For permanent connection to equipment or extension cable, all pole
disconnection, residual current plug according to DIN VDE 0661.
Technical data
Rated actuation current:
10 mA (residual current)
Undervoltage tripping:
16 A, 230 V ~
Housing dimensions:
55 x 100 x 54 mm
F
l
e
x
i
b
l
e
T
r
a
c
e
r
H
e
a
t
e
r
s
61