Technical data

55
Flexible Tracer Heaters
MI-Heating Cable
Type HIL-SS
Heating cable with metal braiding
stainless steel 1.4541
Application potential:
Submersible heaters, containers, valves, pumps, forms, process and
plate heaters.
This mineral-insulated heating cable with a braiding of high grade
steel 1.4541 is applicable within extreme corrosive and damp sur-
roundings. The HIL heating cable is extremely robust and easy to
bend. The stainless steel braiding is watertight, oiltight and gastight.
A utilisation temperature of up to 800°C enables a variety of ap-
plications.
The cold end of the heating cable can be fed into a terminal box and
connected by means of a M20X1.5 screwed connection.
800 °C
Metres 100
Watt/m
Order Nr. AD Ø
mm
Ohm/
Metres
Bending
radius mm
7,2 720 HIL-SS/10007 3,2 10,0 > 12
9,1 910 HIL-SS/10009 3,2 6,3 > 12
11,5 1150 HIL-SS/10011 3,2 4,0 > 12
14,5 1460 HIL-SS/10014 3,6 2,5 > 15
18,0 1800 HIL-SS/10018 3,8 1,6 > 15
23,0 2300 HIL-SS/10023 4,1 1,0 > 20
29,0 2900 HIL-SS/10029 4,5 0,63 > 20
36,0 3600 HIL-SS/10036 5,0 0,4 > 30
46,0 4600 HIL-SS/10046 5,6 0,25 > 30
57,5 5750 HIL-SS/10057 6,5 0,16 > 30
Metres 200
Watt/m
Order Nr. AD Ø
mm
Ohm/
Metres
Bending
radius mm
5,1 1020 HIL-SS/20005 3,2 10,0 > 12
6,5 1300 HIL-SS/20006 3,2 6,3 > 12
7,7 1540 HIL-SS/20008 3,2 4,0 > 12
10,3 2060 HIL-SS/20010 3,6 2,5 > 15
12,7 2540 HIL-SS/20012 3,8 1,6 > 15
15,5 3100 HIL-SS/20015 4,1 1,0 > 20
20,3 4060 HIL-SS/20020 4,5 0,63 > 20
25,5 5100 HIL-SS/20025 5,0 0,4 > 30
32,5 6500 HIL-SS/20032 5,6 0,25 > 30
40,0 8000 HIL-SS/20040 6,5 0,16 > 30
Metres 250
Watt/m
Order Nr. AD Ø
mm
Ohm/
Metres
Bending
radius mm
4,6 1150 HIL-SS/25004 3,2 10,0 > 12
7,3 1800 HIL-SS/25007 3,2 4,0 > 12
9,2 2300 HIL-SS/25009 3,6 2,5 > 15
12,0 2870 HIL-SS/25012 3,8 1,6 >15
14,0 3500 HIL-SS/25014 4,1 1,0 > 20
18,0 4550 HIL-SS/25018 4,5 0,63 > 20
23,0 5750 HIL-SS/25023 5,0 0,40 > 30
29,0 7250 HIL-SS/25029 5,6 0,25 > 30
Heating
conductor
MgO
1.4541
jacket
Operating
temperature:
max. 800°C
Rated voltage:
230 V AC/DC
Rated capacity:
100 / 200 / 250
W/m
Outer jacket:
stainless steel
1.4541
Length of cold ends:
0.5 m
Protection class:
IP 67 (EN60529)
Protective conductor:
yes
Protection class:
I
Temperature control as listed in chapter
6 Temperature Controllers.