Technical data

Heating Hoses
40
200 °C
Heated sleeve
If you have an unheated fi tting and need to keep your medium
at the right temperature, then our HIH heating sleeve is the right
solution.
Applications:
Interconnection of heating hoses, connection of the heating hose
to the system, feeders in the heating hose system, as an adapter
between different fi ttings.
Heating sleeve HIH
Operating temperature:
max. 200°C
Rated voltage:
230 V AC / DC
(other voltage 12 - 500 V)
Rated power:
sleeve Ø 22 mm = 12 W
sleeve Ø 40 mm = 24 W
The capacity is designed so that for heating hoses that are set at
operating temperatures of up to 200°C, the temperature does not
drop in the connector component. For this reason, in the majority
of cases HIH does not need any control, although it can be fi tted
with one if required.
Typ inner diameter heated length total length
HIH – 08
22 mm 70 mm 96 mm
HIH – 16
40 mm 90 mm 120 mm
For special applications, the sleeves can be provided with knock-
outs. These permit the production of special feeder types.
Isolating sleeve without heating HI
Typ Temperature: Inside/length: total length
HI – 08
200 °C 22 mm 70 mm
HI – 16
200 °C 40 mm 90 mm
with loop fastening
Hot-Box
Housing with integrated heater for loss-free connection to analy-
sis lines made with robust metal casing.
Operating temperature:
max. 250 °C
Rated voltage:
230 V AC/DC
(other voltage 12 – 500 V)
Rated power:
will be adapted to design requirements
Dimensions:
will be adapted to design requirements
Isolation:
12 mm of elastomerfoam
Temperature sensor:
selective
Connecting cable:
3 m
Temperature controller:
see Chapter 6 Temperature Controllers
H
O
R
R
Th
o
p
dr
o
f
wi
Analytical Heating Hoses