Technical data

Heating Hoses
38
200 °C
Series HAF
Heating hose with integrated fi lter
Analytical heating hose systems with integrated fi lter are a further
development of the previously separate systems, heated hose and
heated fi lter section. This version has been designed primarily for
use with portable measuring equipment. For this purpose, special
attention has been placed on a light and fl exible design. The version
shown is designed for this application.
Specifi cation HAF
Test gas pipes (PTFE core DN 02 / DN 04) and control pipes can be
fi tted as options in this system. The fi lter housing consists of 1.4571
steel. Versions in Hasteloy or with PTFE coating are also possible.
The heating hoses can be connected to all our governor types. Our
integral system HTI is preferred. Temperature recording for all other
control systems takes place on the fi lter housing.
For general, use the fi lter housing can be adapted to other fi lter
dimensions, other hose nominal widths and hose lengths, so that
this new development can be adjusted to all existing analytical
heating hose systems and covers the complete range of analytical
technology.
Temperature control using our control equipment, as listed in
chapter 6 Temperature Controllers.
Analytical Heating Hoses
Option 2 quick dutch
Filter cartridge
D 30 / 15 x 80 mm
Width over fl ats
of hexagonal nut 17 mm
Biton seals
12,0 x 1,7
Filter case
Stainless steel-enclosing
cap with round threat
¼" threated connection of
measurement entrance
Heating element Thermical insulation
PTFE-Set Filter Kink protectionExternal jacket
Heating hose
Inner core PTFE:
NW fi xed exchangeable
8X
4X X