Technical data
Heating Hoses
32
Industry Heating Hoses
Armatur
(RD)
DN
(mm)
Wand
(mm)
BD
(bar)
Bending
radius
ca. (mm)
44 x 1/6“ 20 6 10 150
52 x 1/6“ 25 6 10 175
58 x 1/6“ 32 6 10 224
65 x 1/6“ 40 7 10 280
78 x 1/6“ 50 7 10 350
95 x 1/6“ 65 7 10 455
110 x 1/4“ 80 8 10 560
130 x 1/4“ 100 8 10 700
max.
Length
(m)
Power
up 40 °C
(W/m)
Power
up 80 °C
(W/m)
40 30 50
40 40 60
40 50 75
40 60 90
40 75 120
40 90 150
40 110 200
40 140 250
80 °C
Series HL 40 / 80
Compact foodstuffs hose with integrated
heating and optional electronic control
The Series HL foodstuffs hose is another innovation and stands out
because of its compact build. The heating element is wound onto
the inner liner of the NBR hose and is thus vulcanised in the inner
core. There is practically no more difference to an unheated hose
either optically or in technical application terms. The temperature
sensor is also worked into the hose and captures the temperature
directly at the hose wall. This universal hose is suitable to transport
fatty (especially animal and vegetable fats & oils) and non-fatty
foodstuffs. Also suitable to carry alcoholic and non-alcoholic bever-
ages and fruit juices.
Operating temperature:
max. 80°C
Rated voltage:
230 V AC / DC
(other voltage 12 - 500 V)
Rated power:
see schedule
Constrution:
Clear NBR inner liner, torsion and pressure-
proof fabric carcass, inside smooth, outside
smooth textile patterned
Outer mantel:
non-scratch, weather-resistant
Colour outer mantel:
blue
Fittings:
Stainless steel fi ttings of 1.4301 vulcanised
bubble-free, Milk tube union / RD
Fittings options:
Conical hose connector / groove nut, threaded
hose connector, optional fl ange (aseptic…),
Clamp
Temperature sensor:
integrated heating conductor with PT 100
sensor
Connecting cable:
1.5 m
Cleaning:
Short-duration steam cleaning up to 130°C
suitable for CiP and convertional cleaning
Protection grade:
IP 54 (EN 60529)
Protection class:
I
All hose materials used meet the requirements of the German
Institute for Consumer Health Protection “Empfehlung XXI Kat.
2“ by BGVV(D) and FDA Part 177.2600
On request, we can also supply suction and pressure hoses with
steel coil. For higher temperatures, we can also make fl uorpolymer
(Viton) hoses. Connectors with fl anges, rapid-action couplings or
exterior threads also available on request.
A range of temperature control devices is available, ranging
from the HT 54 integrated mini-controller with fixed tempera-
ture setting to convenient microprocessor controlled devices. See
chapter 6 Temperature Controllers.
Fitting
Connecting cable
Heating conductor Outer mantel