Technical data

Heating Hoses
26
Industry Heating Hoses
100 °C
Heating hose with internal heating
Applications:
Low-viscosity and gaseous media such as water, oil, lye, acid or air.
The heating as well as the temperature sensors inside the hose have
direct media contact. An optimum heat transfer is thus ensured.
The external diameter is very low due to this design.
No thermal insulation is required up to a usage temperature of
60°C.
Operating temperature:
max. 100°C
Rated voltage:
230 V AC / DC
(other voltage 12 - 500 V)
Rated power:
100 – 200 W / m
Pressure hose:
PTFE NW 6 to 16mm, see page 8
Fitting:
AG and. ÜBW ½" or
3
⁄
8
"
Connector head:
stainless steel or steel zinced / 100 bar
Heating:
heating conducter, PTFE isolated
Thermical insulation:
without, applyable up to 60°C
External jacket:
stainless steel of the main hose
Temperature sensor:
Fe-CuNi type J, NiCr-Ni Typ K, PT100 and
integral control system (HTI) are possible
Connecting cable:
1.5 m
Plug connection:
see schedule page 84 Fuse: on the part of the
builder - Fi-switch
Manufacturing length:
from 5 to 30 m
Protection grade:
IP 54 (EN 60529)
Protection class:
I
Tolerance limits:
Operating temperature:
±5°C
Temperature control using our control equipment, as listed in
chapter 6 Temperature Controllers.
Series H 500
Connecting cable
Type B
Medium input ½“
Safety conductor connetion
to pressure hose
Armatur DKR
Connector head
Stainless steel
Type A
Option medium input ½" on the side
Pressure hose PTFE
(Stainless steel)
Network connecting
Heating (network)
PE (safety conductor)
+
Sensor
-
PTFE-Inner core
PTFE-heating element
Temperature sensor Fe-CuNi
(Cladding thermal element))
Ap
Lo
w
T
h
di
r
Th
N
o
60
O
Ra
Ra
Pr
Fi
Co
H
Th
Type A Type B