Technical data

Heating Hoses
25
Heated twin-hose
Applications:
Polyurethane foam processing, epoxy resin systems, paint spraying
systems, dual-component casting systems.
By heating two separate pressure hoses, cooling down of the com-
ponents during transportation from the machine to the working
position is prevented, and thus their failure to react together in
an optimum manner. A pneumatic hose made of PVC, with 6 mm
inside diameter and rated for 8 bar pressure, is listed with outer
protection.
Special designs will be fabricated to your specifications. Cus-
tom designs based on hose series H 100 / 200 are available on
request.
Operating temperature:
max. 80°C
Rated voltage:
230 V AC / DC
(other voltage 12 - 500 V)
Rated power:
per design
Pressure hose:
PTFE, see page 8
Fittings:
steel / stainless steel, see page 6 – 7
Heating:
heating conducter, according DIN, moisture
protected, with safety braid
Thermical insulation:
inner protective hose and elastomere foam
External jacket:
Polyamid black, option: Textile glass braiding
End cap: PA- hard cap
Temperature sensor:
Fe-CuNi type J, NiCr-Ni Typ K, PT100 and
integral control system (HTI) are possible
Connecting cable:
1.5 m
Plug connection:
per hose one plug, see schedule page 84
Manufacturing length:
7.5m / 15m / 30m / 60m, other lengths
possible
Protection grade:
IP 54 (EN 60529)
Protection class:
I
Tolerance limits:
Operating temperature:
±10°C
Temperature control using our control equipment, as listed in
chapter 6 Temperature Controllers.
Series H 400
H
eat
i
n
g
H
oses
80 °C
Connecting cable
Multipoint connector
Air-hose
Pressure hose
Marking
Connecting cap
Outer jacket
M
u
l
ti
p
oint connector
o
se
M
ar
k
in
g
Connecting cap
O
Industry Heating Hoses