Technical data

Heating Hoses
Fitting
Connecting cable
Elastomer cap
External jacket (glass fi ber)
Thermical insulation
(glass fi ber multi layer)
Heating conductor
Pressure hose T5
Inner core
(Stainless steel corrugated)
Temperature sensor
Plug connection
24
Heating hose with stainless-steel
pressure hose T 5
Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, tar,
paint, water, carbon dioxide, plastics, sealants, etc.
The pressure hose made of corrugated stainless steel, allows
very high temperatures of up to 600°C. In addition it is diffusion-
proof.
Operating temperature:
max. 600°C
Rated voltage:
230 V AC / DC
(other voltage 12 - 500 V)
Rated power:
Watts / metre see page 4
Pressure hose:
T5 stainless steel, see page 8
Fittings:
see page 6 – 7
Heating:
heating conducter, according DIN, moisture
protected, with safety braid
Thermical insulation:
glass fi ber
External jacket:
glass fi ber black, see page 9
End cap:
elastomer cap with tension and anti-knik pro-
tection
Temperature sensor:
Fe-CuNi type J, NiCr-Ni Typ K, PT100 and inte-
gral control system (HTI) are possible
Connecting cable:
1.5 m
Plug connection:
see schedule page 84
Manufacturing length:
from 0.3 to 10 m
Protection grade:
IP 20 (EN 60529)
Protection class:
I
Tolerance limits:
Operating temperature:
±20°C
Temperature control using our control equipment, as listed in chap-
ter 6 Temperature Controllers.
Extended possible use according to customer requirements is pos-
sible through special equipment.
Series H 900
600 °C
Industry Heating Hoses