Technical data

Heating Hoses
Industry Heating Hoses
22
Series H 100 / H 700
H 200 / H 800
Standard heating hose
Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, tar,
paint, water, carbon dioxide, plastics, sealants, etc.
Employable pressurised hoses of PTFE from DN 4 to 50 mm; pres-
sure strain depending on nominal width up to 600 bar.
Operating temperature: H 100
100 °C
H 700
170 °C
H 200
200 °C
H 800
250 °C
Rated voltage:
230 V AC / DC (other voltage 12 - 500 V)
Rated power:
Watts / metre see page 4
Pressure hose:
PTFE, see page 8
Fittings:
steel / stainless steel, see page 6 – 7
Heating:
heating conducter, according DIN, moisture
protected, with safety braid
Thermical insulation:
heat stabilized, compact porous silicone
foam up to 250°C elastomere foam up to
100°C
External jacket:
Polyamid black, options page 9
End cap:
PA- hard cap or elastomer cap
Temperature sensor:
Fe-CuNi type J, NiCr-Ni Typ K, PT100 and
integral control system (HTI) are possible
Connecting cable:
1.5 m
Plug connection:
see schedule page 84
Manufacturing length:
from 0.3 to 50 m
Protection grade:
IP 54 (EN 60529)
Protection class:
I
Tolerance limits:
Operating temperature:
±10°C
Temperature control using our control equipment, as listed in
chapter 6 Temperature Controllers.
Extended possible use according to customer requirements is pos-
sible through special equipment.
250 °C
Fitting
Connecting cable
End cap
External jacket (Polyamid)
Thermical insulation
(Silicone- or Elastomerfoam)
Thermical insulation
(Textil bending)
Heating conductor
Pressure hose
Inner core PTFE
Temperature sensor
Plug connection