Technical data

15
General Pointer and Facts
PFA- 200 °C or PTFE 250 °C
core with 1 mm wall thickness
DN (NW) 4 6 8 10 12
Min. bending radius / mm** 200 250 300 350 400
Pressure / bar* 18 13 10 8 6
Vakuum 8 mbar
VA/VA -Stainless steel 350 °C
core with 1 mm wall thickness (1.4571)
DN (NW) 4 6 8 10 12
Min. bending radius / mm** 300 350 400 500 600
Pressure / bar* 60 60 50 50 40
Vakuum 50 mbar
TA-PFA - 200 °C ore TA-PTFE 250 °C
core with a braiding layer of soft steel wire
DN (NW) 24681012
Min. bending radius / mm** 40 50 75 100 120 130
Pressure / bar* 20 20 20 15 15 15
Vakuum 8 mbar
The inner core are partly available in inch.
PTFE = Polyetrafl uorethylene
PFA = Perfl uoralcoxy
* Temperature correction 100°C x 0.9; 200°C x 0.8; 250°C x 0.7; 350°C x 0.6
** Minimum bending radius under static operating pressure in millimetres Hoses
of stainless steel can be employed virtually without limitation in the range from
-190°C to max. +600°C for liquid and gaseous media in all industries, and are
completely diffusion resistant; not suitable for chlorides, bromides and other
halogens.
Inner core (respectively pipes) for H 300
Series Analytical heating hoses
Choices