Specifications
DEALER DEVELOPMENT
29
Large easy to read LCD displays
pressures, saturated tempera-
tures, actual temperatures, super-
heat and subcooling temperatures
for over 60 refrigerants. When
used with the clamp-on thermo-
couple connector, it will display
the actual temperature and auto-
matically calculates the superheat
or subcool temperature. When the
vacuum sensor cable is attached
to the manifold it will display deep
vacuum. To ensure lasting performance and durability, the manifold case is
constructed of ABS material and protected by a rugged rubber boot.
part no description list
99661-A manifold - digital 2-way kit 935.97
Manifold – Mastercool
The best tool to diagnose what’s going on
in an ECM System is an in-line diagnostic
tool. The Variable Speed Zebra is exactly
that: a tool that connects between the air
handler’s circuit boards and the motor.
n
operates in-line with the system, in real
time, testing both major sections (motor
and control boards) simultaneously
n
monitors the signals going out of the
circuit boards, displays them for you and
then either (a) passes them along to the
motor, or (b) allows you to interrupt the
signals and control all the functions of the motor directly
n
displays the motor’s CFM airflow, the motor’s RPM, and the control
voltages being sent to the motor’s electronics module
n
two DVD’s are included to teach ECM Theory and ECM Troubleshooting; a
printed manual is also included
part no description list
VZ-7 variable speed Zebra ECM motor tester 795.00
ECM Motor Tester – Zebra
The complete solution to your recovery needs.
n
safety high pressure switch
n
simple internal structure for field service
n
largest volume recovery rate in market
n
injection molded high density poly-
ethylene case for maximum durability
n
front cover has bumper guards built
in to reduce damage to the control knob
n
for use with all refrigerants including R410A
n
revolutionary double piston oil-less compressor
part no description list
69300 twin turbo refrigerant recovery machine 1600.73
Refrigerant Recovery – Mastercool
A low cost, easy to use device that will analyze
ECM motors independent of the HVAC
system; it operates in the basic HVAC
settings of fan only, heating, cooling and de-
humidification.
n
suitable for use with Genteq (GE) ECM 2.0,
2.3, and 3.0 series motors
n
specially designed to detect and isolate motor
failures from other HVAC system failures
n
includes a 16 to 4-pin connector, ECM
service guide, ThinkTank 3.0 service overview
part no description list
PD510009 TECMate Pro ECM motor tester 127.24
ECM Motor Tester – Genteq
Rescue Select Blower Motors – U.S. MOTORS
part no hp volts rpm description list
KIT41 SelectTech / RESCUE Select Programming Module 1219.61
6630RS 1/3–1/2 120V RESCUE Select Blower Motor 618.09
6631RS 1/3–1/2 208–230V RESCUE Select Blower Motor 618.09
6640RS 3/4 120V RESCUE Select Blower Motor 718.52
6641RS 3/4 208–230V RESCUE Select Blower Motor 718.52
6650RS 1 120V RESCUE Select Blower Motor 856.15
6651RS 1 208–230V RESCUE Select Blower Motor 856.15
The RESCUE Select is an ECM aftermarket motor that replaced OEM
constant torque blower motors.
n
no need to wait for the OEM motor to be ordered, customized programming
performed at the store counter
n
replaces X-13, Endura Pro and SelectTech constant torque ECM motors
n
patented high efficiency design with smooth, quiet start up
n
wired to OEM equipment using the existing connection for ease of installation
n
direct OEM replacement – programmed torque values set to match OEM performance
n
6000V surge protection – more the double the protection of any OEM motors
n
fully potted electric module for superior moisture protection
n
motor and module technology create smooth, quiet speed changes
n
two-year limited warranty
FREE
KIT41 PROGRAMMING MODULE
WITH PURCHASE OF 20
RESCUE SELECT MOTORS
LISTEd bELOW