User`s manual

Appendix A Expansion Bus
Page: A-4
PSB-601LF USER
′ S MANUAL
COMPACT FLASH CARD PIN ASSIGNMENT
You will find a Compact Flash connector in our PSB-601LF.
The pin assignments are as follows :
PIN
ASSIGNMENT PIN ASSIGNMENT
1 GND 26 -CD1
2 D03 27 D111
3 D04 28 D121
4 D05 29 D131
5 D06 30 D141
6 D07 31 D151
7 -CS0 32 -CS11
8 A102 33 -VS1
9 -ATASEL 34 -IORD
10 A092 35 -IOWR
11 A082 36 -WE3
12 +3.3V 37 INTRQ
13 VCC 38 VCC
14 A062 39 -CSEL
15 A052 40 -VS2
16 A042 41 -RESET
17 A032 42 IORDY
18 A02 43 -INPACK
19 A01 44 -REG3
20 A00 45 -DASP
21 D00 46 -PDIAG
22 D01 47 D081
23 D02 48 D091
24 -IOCS16 49 D101
25 -CD2 50 GND
 Because ATA33 cable and ATA66/100 cable pin34 specification
are different, therefore, while CF card and other devices are using
IDE 1 channel at the same time, the ATA66/100 cable will make
the device detecting time expand. Thus, it is suggested to use
ATA33 cable to avoid the problem.
 When CF card and other devices are using IDE1 channel at the same
time, please refer to “Chapter 4: Award BIOS Setup” to set BIOS in
Integrated Peripherals/ OnChip IDE Device/ IDE DMA transfer access/
DISABLED.