User Manual

Bag Housing
7 www.pro-team.com 866.888.2168
HOSE CAP COLLAR REPAIR – XP Models Only
To inspect the collar, attach the quick
release cuff to the bag cover collar. Lift
the vacuum by the hose cuff. The collar
should support the weight of the vacuum.
If not, the collar will fail and separate from
the bag cover. The collar will need to be
removed from the quick release cuff and
re-glued into the bag cover. If this collar
test fails, Proceed to Step 2.
1.
Clean the quick release cuff and bag
cover with rubbing alcohol to ensure a
secure grip.
Apply a continuous bead of adhesive*
around the entire perimeter of the
detached collar. Care should be taken
to avoid drips and runs.
2.
Quickly insert collar into bag cover evenly,
pressing firmly for 20 seconds to ensure
an adequate bond.
3.
IMPORTANT: you have only a few seconds
to apply the bead of glue and seat the collar
into the bag cover.
*IMPORTANT: use only Loctite adhesive #454.