User Manual

35 www.pro-team.com 866.888.2168
HANDLE ASSEMBLY (CONTINUED FROM PAGE 34)
Lay the long red, brown and blue wires between
the circular shoulders and gently place handle
bezel into handle.
9.
fig. 5
Slide tab A into handle slot B and press firmly
into place at C. Be sure all switch wires are routed
between screw bosses to ensure that the wires do
not get damaged. Insert screws into bezel (fig. 5).
10.
A
C
Press the switch into place in the handle bezel.
The II position should be closest to the front of
the bezel.
8.
Switch must remain flat to the handle bezel when
installed into handle body as shown.
7.
Handle
B