User Manual

www.pro-team.com 866.888.2168 34
HANDLE ASSEMBLY (CONTINUED FROM PAGE 33)
Feed wires through opening on handle bezel.
4.
Using the diagram provided above, attach wires to
switch. Orient the switch box with the II
position on the down side.
a) Attach the first plug on the brown wire to the
middle left spade.
b) Attach the first plug on the blue wire to the
lowest left spade. Wait to attach the last
blue plug.
c) Wrap the second brown plug underneath blue
and attach to the middle right spade.
d) Attach the last blue plug to the upper
right spade. The bottom right spade will
remain unattached.
e) Connect the red wire to the top right spade.
5.
I
0
II
position II must be on the bottom
before attaching wires to spades
long
blue
long
brown
short
brown
short
blue
red
back of switchfront of switch
B
L
U
E
B
L
U
E
B
L
U
E
R
E
D
R
E
D
R
E
D
R
E
D
R
E
D
B
R
O
W
N
B
R
O
W
N
B
R
O
W
N
B
R
O
W
N
When finished with steps a) through e) your final
wire connection configuration should appear
as above.
6.
Install the switch into the handle bezel. Place the long
BLUE, BROWN, then RED wires between the screw bosses
in that order (as shown). BROWN and BLUE wire loops
must be positioned above the screw bosses on the handle
bezel as shown.
(Continued on page 35)
Handle