User Manual

33 www.pro-team.com 866.888.2168
HANDLE ASSEMBLY
Feed handle wire harness through new handle and
replace screw at the base of the handle (fig. 4).
3.
Use a flathead screwdriver (fig. 1) to pry bottom of switch from the handle body. Disconnect all wires from switch
posts by depressing locking tab on base of crimps. (fig. 2)
1.
fig. 1 fig. 2
Remove screw at base of handle and remove from
handle tube (fig. 3).
2.
fig. 3 fig. 4
(Continued on page 34)
Handle